Silicone-Free Thermal Pads

Many applications today such as optical, medical, and sensor devices certain requirements preventing them from using silicone based products. To meet these demands, KITAGAWA INDUSTRIES America offers a variety of silicone-free thermal pads. We use an acrylic rubber base to eliminate any concerns of siloxane outgassing and oil-bleeding. Our silicone-free thermal pads are very soft which is beneficial for reducing applied stress on the PCB and lowering the thermal resistance.

Phase Change Gel Thermal Pad: CGD/CGDR Series

Phase change material appears to be like any normal thermal pad at room temperature, but when heated to 50° C, it transforms into a liquid to fill in any gaps between the heat sink.

Change Gel Thermal Pad + EMC Dual Function: CGE Series

Thin + Dual functional sheet for EMC and thermal management. Phase Change at 50 degrees C to secure close contact with heating elements. Very thin : 0.25mm.

Thermal Pad and Vibration Damper: CPAG Series

Silicone-Free, heat-conductive vibration damping sheet. Silicone-free material, so there is no siloxane outgassing. Suitable for applications with both thermal and vibration/shock issues.

Silicone Free Thermal Pad: CPSH Series

Soft, 5W/m•K silicone-free thermal pad for high operating temperature applications. Compliable thermal pad helps to crowd out air bubbles to reduce thermal resistance.

Ultra-Soft Silicone-Free Thermal Pad: CPSS Series

Super soft and compliable material allows for less pressure on the heat source, such as the IC or PCB, when compared to a standard TIM. Suitable for vibration control.

Thermal Putty: CPVG Series

Putty does not drip even when thickly applied. Extremely useful in filling gaps with varying component heights. Very little compressive force on…

Silicone Free Thermal Pad: CPVH Series

Soft, 3W/m・K silicone-free thermal pad for high operating temperature applications. One side thin permanent PET film and one side naturally tacky is standard.

Silicone Free Thermal Pad: CPVS Series

Soft (ASKER C 18) silicone-free thermal pad. Excellent stress relaxation property reduces the stress on the elements after mounting. Overall low outgassing.

Silicone Free Thermal Pad: CPVP-F Series

Super compliable (ASKER C 0) material sandwiched between thin permanent PET film and light tacky layer for easy handling. Because the CPVP is so soft, very little…

Silicone Free Thermal Pad: CPVT Series

Ultra-thin, thermally conductive sheet, suitable for devices where clearance is limited. Available thicknesses ranging from 0.1 mm ~ 0.25…

EMI Absorber and Thermal Pad: EMPV4-F Series

No siloxane outgassing concerns. Compliable material (ASKER C 40) that conforms to uneven surfaces. Excellent EMI absorber performance (μ’=13 at 10MHz).

EMI Absorber and Thermal Pad: EMPV5-F Series

The two-layer structured putty can be handled in the same way as a pad. Has a thermal conductivity of 3.0W/m ∙ K, which is 2.1 times higher than the existing product. Silicone-free THERMAL PAD contains no siloxane.

EMI Absorber and Thermal Pad: EMPV5-F Series

Silicone-free material, great for applications sensitive to siloxane and oil-bleeds. KGS-original formulation allows for great EMC noise suppression.