Thin and Flexible Ferrite Core: FFPC Series
Thin Ferrite Sheet provides optimal EMC solution for FPC (Flexible Printed Circuit) and FFC (Flexible Flat Cables).
A and B: Soft Ferrite, C and D: PET with adhesive layer
1. PET with adhesive layer, 2. Soft Ferrite, 3. Double-sided adhesive tape
Part No. | A | B | C | D | Applicable cable width |
---|---|---|---|---|---|
FFPC-0.3-10-5 | 10.0 | 5.0 | 32.5 | 6.5 | 10 |
FFPC-0.3-10-10 | 10.0 | 10.0 | 30.0 | 11.0 | 10 |
FFPC-0.3-12-8 | 12.0 | 8.0 | 38.5 | 9.5 | 12 |
FFPC-0.3-14-14 | 14.0 | 14.0 | 38.0 | 5.0 | 14 |
FFPC-0.3-22-8 | 22.0 | 8.0 | 60.5 | 9.5 | 22 |
FFPC-0.3-22-14 | 22.0 | 14.0 | 54.0 | 15.0 | 22 |
FFPC-0.3-27-14 | 27.0 | 14.0 | 70.5 | 15.5 | 27 |
FFPC-0.3-44-14 | 44.0 | 14.0 | 98.0 | 15.0 | 44 |
Unit:mm
Higher insertion loss and excellent EMC suppression in low frequency range (30MHz~300MHz) compared to metal filler electromagnetic noise suppression sheet.
Radiated emission level from differential signal cable with component.
Mounting FFPC onto flexible cable
1. Gently bend the liner while take the ferrite sheet off.
2. Attach SMARTPLY to the cable on (A) part.
3. Attach on part (B) and wrap with SMARTPLY around the cable.
4. Fold part (C) so as to attach part (A) on the back side of part.
5. It’s ready by simple procedure.
Impedance vs Frequency
* Specifications and dimensions are subject to change without notice for product improvement.