Ni-Zn Ferrite Clamp: KRFC Series

Split-core ferrite clamp designed to filter noise from around 3 ∼ 50 MHz

  • Effective suppression of conducted noise up to 30MHz and radiated noise over 30MHz
  • Cable tie loop can assist to fix ferrite clamp to wire harness (except for KRFC-4 )
  • Notches on both sides of the inner side of the plastic clamp prevent wires from shifting out of place when winding ( Photo A)
  • Operating temperature: -20 ~ 85°C
  • With optional mounting fixture, the product can be assembled on enclosure by M4 screw. (KRFCK2-15, KRFCK2-26)
  • Operating temperature: -40°C ~ +85°C
RFC-A Specifications

Material:

Ferrite Core: Soft ferrite
Housing: PA66 (Color: Natural/Flammability: UL94V-0

Dimensions:

Ni-Zn Ferrite Clamp: KRFC Profile
Part No.ProfileABCDApplicable cable diameterImpedance Ω/100MHz (1 turn)
KRFC-4113.713.527.5Φ 3.5 ~ 4.5≥70
KRFC-6118.118.431.535.5Φ5.5 ~ 6.5≥110
KRFC-8120.120.431.535.5Φ7.5 ~ 8.5≥80
KRFC-9120.120.431.535.5Φ8.5 ~ 9.5≥80
KRFC-10126.326.432.437.2Φ9.5 ~ 10.5≥120
KRFC-13129.129.431.536.3Φ12.5 ~ 13.5≥105
KRFC-15*236.140.142.852.3Φ15.5≥105
KRFC-26*252.852.144.854.3Φ26.0≥196
Unit:mm
* Other types with optional parts (KRFCK2-15, KRFCK2-26)

Impedance vs. Frequency

Impedance vs Frequency Characteristic: KRFC-15
Impedance vs Frequency Characteristic: KRFC-26
Impedance For Each Product Series

* Specifications and dimensions are subject to change without notice for product improvement.

Advancements in communication technologies have made it possible to transmit more data at high speeds, allowing industrial equipment to perform simple to complex tasks. In addition, the introduction of Artificial Intelligence (AI) in the factory setting is being considered to further improve productivity.